What Er36 Means
Er36 means a short circuit has turned up at the temperature-monitoring sensor built into the touch control or the power unit — the circuit tasked with watching those parts for overheating.
Common Causes of Er36
- A shorted temperature sensor inside the touch control or power unit
- Moisture getting into the electronics bay
- Damaged wiring running between the sensor and the control board
🔧 One Safe Check You Can Try
No safe home check exists for this — testing a shorted sensor circuit requires the cooktop fully de-energized first, which is technician work.
⚠ Why You Shouldn't Go Further Than That
- Since this is a short-circuit condition on a live-voltage board, testing it without fully isolating power first is a genuine shock hazard.
- Sitting close to high-current coil wiring, this sensor is easy to disturb carelessly and introduce a second, separate fault.
- Mistake this for a general touch-controller failure and you end up paying for the wrong, costlier part.
- Getting into the electronics bay beneath the glass typically forfeits the remaining warranty.