Fisher & Paykel Appliance Repair, From DishDrawer to ActiveSmart
A DishDrawer that won’t close its lid, an ActiveSmart refrigerator that has stopped making ice, a SmartDrive washer that stops mid-cycle? We repair Fisher & Paykel refrigerators, dishwashers, washers, dryers, ovens, ranges, cooktops, microwaves and built-in coffee machines. You get a written price before any work starts, and our labor carries a 30-day workmanship warranty.
Full-Service Fisher & Paykel Appliance Repair
One call covers diagnostics, repair, and follow-up — for every major Fisher & Paykel appliance in your home.
Multi-Unit & Property Manager Service
Priority scheduling and consolidated billing for property managers and multi-unit buildings with Fisher & Paykel appliances.
Learn more →Warranty Repair Support
Honest guidance on manufacturer warranty coverage, plus our own workmanship warranty on every completed repair.
Learn more →Installation & Setup
Professional installation for new Fisher & Paykel refrigeration, DishDrawer and standard dishwashers, ovens, cooktops, and ranges.
Learn more →Preventive Maintenance
Scheduled visits that catch drawer seals, vents, and sensors before they turn into a full breakdown.
Learn more →Diagnostics & Error Code Troubleshooting
A precise, hands-on diagnosis of exactly what's wrong — before any part gets replaced.
Learn more →Same-Day Repair
Book before early afternoon in most cases and we'll get you a real technician the same day, within a real arrival window.
Learn more →We Repair Every Major Fisher & Paykel Appliance
Select your appliance to see common problems, error codes, and book a technician.
Recognize the Warning Signs
These are the issues we get called about most. If any of this sounds familiar, it is worth a diagnostic visit before the problem gets worse.
DishDrawer dishwasher won’t start or the lid won’t seal
When a DishDrawer starts a wash, a lid lowers onto the tub, so a tall pan handle or utensil sticking up can stop the cycle before water goes in. Check that nothing rises above the basket and that the filter in the base is clean. If the drawer still beeps and stops, we test the lid motor, the drawer seal and the drawer latch sensing before anything is ordered. See likely causes →
ActiveSmart refrigerator ice and water slowing or stopped
An overdue water filter and a half-closed supply valve behind the unit cause most slow dispensing, and both are safe for an owner to check. If flow stays weak with a fresh filter, the technician tests the water inlet valve and looks for a frozen line inside the door before replacing anything. See likely causes →
SmartDrive washer stopping mid-cycle or not draining
A SmartDrive washer drives the drum directly from its motor, so an overloaded or badly balanced load can make it pause and try again. Redistribute the load and check that the drain hose is not kinked or pushed too far into the standpipe. If it still stops, we test the motor’s position sensing, the drain pump and the water level reading. See likely causes →
Smell of gas around the range
Leave every knob and switch exactly as it is, and do not unplug anything. Open a door on your way out, leave the house, and call the gas utility from outside. Once the utility has cleared the home, a technician checks the burner valves, the connection and the regulator; gas work is never a do-it-yourself job. See likely causes →
Oven self-cleaning door stays locked or heat is uneven
After a pyrolytic self-clean, the door stays locked until the cavity has cooled, which can take a while; give it time before assuming a problem. If it stays locked when cold, or baking is uneven across racks, we test the door lock, the elements and the temperature sensor against a measured cavity temperature. See likely causes →
Dryer needs two cycles to dry a normal load
Clear the lint filter and check the outside vent flap opens when the dryer runs; a long or crushed duct slows drying more than most owners expect. If airflow is good and clothes still come out damp, the technician tests the heater, the thermostats and the moisture sensing that decides when the cycle ends. See likely causes →
Why Homeowners Trust Us With Their Fisher & Paykel Appliances
Fisher & Paykel Is Our Daily Work
DishDrawer lids, ActiveSmart ice systems and SmartDrive motors each fail in their own way. Our factory-trained technicians know those designs, so the visit starts with the right tests instead of guesswork.
Licensed, Insured and Independent
We are an independent repair service, licensed and insured, and not affiliated with the manufacturer. What we offer is a careful diagnosis and a straight answer about your appliance.
A Written Price First
The technician explains what failed, which part it is and what the repair costs, in writing, before any work begins. If the appliance is not worth fixing, you hear that too.
30-Day Workmanship Warranty
Our labor is covered for 30 days after the repair. If the same problem returns in that time, we come back to put it right.
See why a Fisher & Paykel specialist beats a general repair shop →
Why a Fisher & Paykel Specialist Beats a General Repair Shop
A Fisher & Paykel specialist focuses exclusively on Fisher & Paykel appliances, carries Fisher & Paykel-specific parts in every service vehicle, and trains technicians specifically on Fisher & Paykel diagnostic procedures. A general repair shop works across dozens of brands and often doesn't stock parts — or carry deep expertise — for a less common model.
| Capability | Us · Fisher & Paykel Specialist | General Repair Shop |
|---|---|---|
| Fisher & Paykel parts in stock | Always | Sometimes |
| Fisher & Paykel-trained technicians | Every tech | Maybe one |
| Knows current + legacy models | Every series | Limited |
| Repair warranty included | 30 days | Varies |
| Background-checked technicians | Required | Varies |
Proudly Serving Five Major Metro Areas
Every city page below is built for your local address, crew, and response time — not a generic template.
What Fisher & Paykel Owners Say About Us
“The lower drawer on our DD24DCTX9N started throwing an F1 the same week we had a wedding to host. I panicked and shut off the water like the manual said. Technician came out, found the drawer wasn't sealing all the way from a warped gasket, no actual leak, and had it fixed before anyone arrived. Never would've guessed both drawers had separate seals.”
“We did a full column install in Coral Gables, RS36A72J1N on the fridge side, and about a year in the door started dragging on its hinge from the weight of the custom panel. Took two visits to get the alignment exactly right but they didn't charge extra for the second trip since it was the same issue.”
“Power came back on after the last storm blew through and our induction cooktop just sat there dark, no response at all. Assumed we'd fried the whole thing. Technician traced it to the control board rather than the coils themselves, had a replacement on the truck, and we were cooking again that afternoon.”
“One DishDrawer, no dishwasher backup, in a Murray Hill one-bedroom, so when it stopped draining I was not thrilled. Turns out running a single drawer for two people's dishes daily wears the filter out faster than they expect from the spec sheet. Cleared it, showed me how to do it myself next time, five stars for that alone.”
“Our RS36W80RU1N stopped dispensing water about a month after closing on the apartment. I was bracing for a whole cooling-system diagnosis. Guy spent ten minutes explaining the dispenser runs on a separate line from the compressor, found a kink, done. Docking one star only because scheduling took three days.”
“This DishDrawer is older than my daughter, a DD24SCTX7 we bought used from the previous tenant, and I fully expected to be told to replace it. Instead the tech said the drain and seal parts are shared enough across generations that it was a routine fix. Fifteen years old and still going.”
“Dishes kept coming out of our DD24DCTX9N with a cloudy film no matter what detergent we tried. I was convinced it needed a new pump. Turned out to be Houston water scaling up the spray jets, cleared the fine filter, problem gone. Wish they'd mentioned the hard-water thing when we first bought the thing.”
“Our RF170ADUSX4N ice maker went from slow to nothing over about two weeks. I kept blaming the water line. It was actually an ActiveSmart sensor throwing off the whole cooling loop, not what I expected at all, and the fridge itself was cooling fine the entire time.”
“Six-burner RGV3-366-N in a River Oaks kitchen we use constantly for entertaining, and one back burner just started clicking without lighting. Tech had the igniter swapped in about twenty minutes and explained why more burners doesn't mean more likely to fail, they're all independent circuits.”
“We run our twin DishDrawer hard for dinner parties in Beverly Hills, and one side started throwing an F2 while the other kept working perfectly. I assumed a shared electrical problem. Nope, each drawer has its own motor and control board, so they fixed the one side without touching the other at all.”
“After one of the PSPS shutoffs last fall our induction cooktop touch panel went completely dead, an Er20 apparently. Cycling the breaker myself didn't clear it. Technician cleaned the surface and reseated a connector and it's worked fine since, though it took a week to get an appointment during fire season.”
“Ran self-clean on our OB30DDEPX3N for the first time in maybe two years and the top oven locked up solid with an F7 on the display. I nearly pried the door myself before reading the manual said not to. Let it cool overnight like they advised, they came out the next day and reset the lock mechanism properly.”
“Our CG365DLPX1 sits right off an open pass-through wall near La Jolla, so the salt air gets right to it even though it's technically indoors. Wok burner started sputtering and I figured it was just old age. Corrosion on the igniter from the ocean air, exactly what they said to expect with our layout.”
“Coronado house, refrigeration column that started reading warm on one side. Display just blinked in a pattern I didn't understand until the technician explained it was a Fault 3, a sensor issue, not the compressor. Fixed same visit, though I wish there'd been an actual number on the screen instead of a blink code.”
“I still have the DD603 we installed in Encinitas back when the kids were in grade school, and everyone tells me to just replace it already. This company's the only one who didn't roll their eyes, found the parts, cleared out the spray arm and drain line, and it runs quieter now than it did new.”
Your Fisher & Paykel Appliance Doesn't Have to Wait
Book online in under a minute, or call now and talk to a real technician — not a call center script.
Our technicians specialize in Fisher & Paykel appliances and are trained specifically on Fisher & Paykel engineering, control boards, and error-code diagnostics, so repairs are faster and more accurate than a generalist visit.
Most requests in Miami, New York, Houston, Los Angeles, and San Diego are scheduled same-day or next-day, depending on your neighborhood and time of day you call.
The diagnostic fee is disclosed upfront when you book and is waived when you approve the repair, so there is never a surprise on your invoice.
Let us know when you book - we will help you understand your options, and if it is more cost-effective to route the claim through Fisher & Paykel directly, we will tell you honestly.
Our technicians stock the most common Fisher & Paykel parts for your appliance type, so the large majority of repairs are completed in a single visit.
Book online or call in, and a technician arrives in the window we give you. They diagnose the problem on-site, walk you through what is actually wrong, and give you a flat price before any repair starts - nothing happens until you say go.
Every completed repair carries a 30-day workmanship warranty. If the same issue comes back in that window, we return and fix it at no charge. Parts may carry the manufacturer warranty where applicable.
Miami, New York, Houston, Los Angeles, and San Diego, plus the surrounding neighborhoods in each metro. Check your city page for local response times and the specific areas we cover.
Yes - every technician we send is licensed, insured, and background-checked before they are allowed on a job. You can ask to see credentials on arrival.
We are open 7:00 AM - 8:00 PM on weekdays and 8:00 AM - 6:00 PM on Saturdays. Sunday availability is limited to emergency calls only - mention the urgency when you book and we will do what we can.