Fisher & Paykel DGGX2 Repair & Common Issues

The DGGX2 pairs the SmartLoad top-loading cabinet with a gas burner, and the split of responsibilities inside it is worth understanding: the drum, the controls and the exhaust sensing run on 120V exactly as the electric version does, while only the heat comes from gas. That is why a DGGX2 that tumbles happily but dries nothing is nearly always a burner-side problem — igniter, flame sensing or the gas valve — rather than anything wrong with the control board.

Key Features

SmartLoad top-loading gas dryer
Gas burner with 120V control and ignition electronics
Lint bucket collection system
Electronic exhaust temperature sensing

Most Common Issues on This Model

01

Igniter or flame-sense problems leaving the drum tumbling cold

02

Exhaust temperature sensor problems

03

Blocked or crushed vent run

04

Gas valve coil failure

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Call (844) 523-3671 Schedule an Appointment

FAQ

Fisher & Paykel DGGX2 FAQ

On a gas SmartLoad, to the burner circuit. The igniter, the flame sensor and the gas valve coils are the three usual candidates, and they are tested in that order.

We would not recommend it. The gas supply has to be shut off at the appliance valve before anyone works anywhere near the burner or the valve, and that is work for a qualified gas technician.

Fisher & Paykel DGGX2

Key Features

Most Common Issues on This Model

Error Codes Common to This Model

Fault 12

Fault 14

Fault 15

Fault 16

Fault 20

Fault 22

Own This Model? Book a Diagnosis.

Fisher & Paykel DGGX2 FAQ