What Fault 14 Means
Fault 14 is logged as a sensor module problem, and F&P gives it one remedy: replace the sensor module. That board handles the exhaust sensing and drives the lid and door actuators, so its failure often shows up as a cluster of codes rather than this one alone.
Common Causes of Fault 14
- An internal failure detected by the sensor module
- Degradation of the module electronics with age
- Damage from a supply disturbance
🔧 One Safe Check You Can Try
Switch the dryer off at the breaker for two minutes and restore power once. A self-check that fails at a single start-up is worth ruling out before a part is discussed.
⚠ Why You Shouldn't Go Further Than That
- Isolate the dryer at the breaker before the module is reached, as it sits on a mains-fed circuit inside the cabinet.
- Because this module also drives the actuators, a technician will want the whole problem log rather than the code on screen, and a reset wipes that context.
- Modules are static-sensitive and can be damaged in handling before they are even connected.
- With the brand out of the US laundry market, sourcing a correct module is a matter of exact reference rather than availability.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.