What F7 Means
F7 flags a door-lock fault — the door isn't in the state the control board expects during a cycle that calls for it to be locked or unlocked, and it's the code most often logged when a self-clean run gets stuck partway through.
Common Causes of F7
- The door lock motor or solenoid has failed
- The door lock mechanism physically jammed
- A faulty door switch, or the temperature sensor feeding the lock-release logic
🔧 One Safe Check You Can Try
Leave the door alone rather than forcing it. Cut power at the breaker and let the oven cool all the way down — many door-lock-related self-clean lockouts release on their own once interior temperature falls back to a normal range.
⚠ Why You Shouldn't Go Further Than That
- Self-clean can leave the cavity sitting well above 800°F, so forcing a locked door open at that heat risks a serious burn.
- Because the lock solenoid draws off the same high-voltage circuit as the heating elements, testing it while powered is a genuine shock hazard.
- Muscling a jammed lock mechanism can warp the strike plate, leaving the door harder to lock and unlock correctly from that point on.
- If the lock goes back together even slightly out of alignment, it can refuse to release again even after the fault is supposedly "fixed."
- Reaching the lock mechanism generally means removing the inner door panel, a step that commonly costs owners the rest of their warranty.