Fisher & Paykel DG7027P1US Repair & Common Issues

The DG7027P1US closes out Fisher & Paykel’s US gas dryer line, and it fails in the ways gas dryers of any brand do once they pass the ten-year mark: the igniter weakens, the valve coils soften with heat cycling, and the exhaust duct fills up quietly behind the machine. The one thing specific to it is the sensor-driven cycle, which will happily declare a load dry on bad information rather than simply running long.

Key Features

AeroCare gas dryer, P-revision, US specification
Gas burner with electronic ignition
Sensor-controlled drying
Electronic cycle selection

Most Common Issues on This Model

01

Gas valve coil failure

02

Igniter cracked or weak

03

Vent restriction causing short-cycling

04

Moisture sensing drift

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Call (844) 523-3671 Schedule an Appointment

FAQ

Fisher & Paykel DG7027P1US FAQ

On a sensing dryer that pattern usually means the sensor is reading the surface of the load rather than the whole of it, often because the load is too large or the sensor contacts are coated.

No. If the dryer smells of burning or is heating erratically, stop using it and shut off the appliance gas valve until it has been inspected.

Fisher & Paykel DG7027P1US

Key Features

Most Common Issues on This Model

Error Codes Common to This Model

Fault 7

Fault 8

Fault 10

Fault 11

Fault 12

Fault 14

Own This Model? Book a Diagnosis.

Fisher & Paykel DG7027P1US FAQ