Fisher & Paykel Washer

Fisher & Paykel WA42T26GW

Model # WA42T26GW (product codes 96193 US, 96194 CA)

Fisher & Paykel washer repair

At 4.2 cu. ft. the WA42T26GW was the larger of the two machines Fisher & Paykel bundled into service manual 479602, and it carries two product codes — 96193 for the US build and 96194 for Canada — on hardware that is otherwise the same. The extra basket volume is the reason bearing and lip-seal wear shows up more often on this model than on its 3.7 cu. ft. sibling: a bigger wet load puts more standing weight on the same shaft.

Key Features

  • 4.2 cu. ft. EcoSmart top-loader
  • SmartDrive direct-drive motor
  • Separate US and Canadian product codes on an otherwise common machine
  • Diagnostic mode with drain pump and valve tests

Most Common Issues on This Model

01

Drain pump failure or blockage

02

Inlet valve sticking open or failing to open

03

Motor control module problems

04

Bearing and lip seal wear leaking water into the cabinet base

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

FAQ

Fisher & Paykel WA42T26GW FAQ

Not always. On a SmartDrive top-loader, a failing shaft lip seal lets water past the bearing and down the outside of the motor, which looks like a leak from underneath but is a different repair.

Yes. Fisher & Paykel covered both product codes in one manual; the difference is in compliance labeling rather than in the wash system.

Need a repair? We're ready to help. Call Now
Call Us Schedule